Types of Wire Joint, ‪The Best Way To Connect Two Wires, Types of Electrical Joints, How To Joint Two-Wire, Wire Joint Trick, Electrical Joints,

A friend today we'll talk About Types of Wire Joint, ‪The Best Way To Connect Two Wires, Types of Electrical Joints, How To Joint Two-Wire, Wire Joint Trick, Electrical Joints,

 

There are few things in the Wire Joint that I want to tell you first The wire connects all, but the way to tapping on it, the method of joining it is not known to everyone. 

If you do not connect the proper, then after taking the load the wire hits from the point of joint and it becomes the chances of getting spark and fire

In the wire joint, up to 3 inches of wire in both of the wire, you have to strip the PVC and if you are using the tape then by tapping the joint one and half-inch above the joint, you have to tape up to one-half inch. 

And the tight is that because of the hit, your tape is not open, if you have a hit shrinking tube, then you can do the hit shrinking so that the batter is for the wire joints.

In the Wire Joint, I'll Tell You Some Simple Tips

You can joint the wire from 0.5 squares to 6 squares, by dividing it into two parts.

You can connect the wire from 10 square mm to 16 square mm by dividing it into three parts.

To join a wire above 25 squares mm, we use crimping tool joints lag and cable joint accessories m.s seal.

Try your wiring that the joint is at least And whenever the joint is between Neutral and phase, its distance is at least 3 inches